Your shopping cart is empty!
Welcome to MybotOnline!
0
Shopping Cart
0 item(s) - $0.00
STEPPERONLINE Nema 23 Bipolar 0.9deg 1.26Nm (178.4oz.in) 2.8A 57x57x56mm 4 Wires
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
STEPPERONLINE Nema 23 Bipolar 0.9deg 1.26Nm (178.4oz.in) 2.8A 57x57x56mm 4 Wires
Product Code: 23HM22-2804S
Availability: 98
Availability: 98
$17.35
5 or more $15.87
10 or more $15.13
50 or more $14.40
100 or more $13.66
10 or more $15.13
50 or more $14.40
100 or more $13.66
100% brand new from STEPPERONLINE (The No 1 distributor in the world for stepper motors and drivers).
This nema 23 stepper motor with step angle 0.9deg and size 57x57x56mm. It can generates 1.26Ncm (178.4oz.in) of holding torque at 2.8 Amps.
Resources:
- Full Datasheet: 23HM22-2804S.pdf
- Torque Curve: 23HM22-2804S Torque Curve.pdf
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(oz.in) | 178.4 |
| Inductance(mH) | 4.5 |
| Phase Resistance(ohm) | 1 |
| Rated Current(A) | 2.8 |
| Step Angle(°) | 0.9 |
| Physical Specification | |
| Body Length(mm) | 56 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 6.35 |
| Shaft Length(mm) | 21 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 700 |
| Frame Size(mm) | 57x57 |
MybotOnline
2013 ~ 2023. All Rights Reserved