Your shopping cart is empty!
Welcome to MybotOnline!
0
Shopping Cart
0 item(s) - $0.00
STEPPERONLINE Nema 11 Bipolar 1.8deg 6Ncm (8.5oz.in) 0.67A 28x28x31mm 4 Wires
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
STEPPERONLINE Nema 11 Bipolar 1.8deg 6Ncm (8.5oz.in) 0.67A 28x28x31mm 4 Wires
$11.73
5 or more $10.86
10 or more $10.21
50 or more $9.55
100 or more $8.90
10 or more $10.21
50 or more $9.55
100 or more $8.90
100% brand new from STEPPERONLINE (The No 1 distributor in the world for stepper motors and drivers).
This nema 11 stepper motor with step angle 1.8deg and size 28x28x31.5mm. It can generates 7Ncm (9.91oz.in) of holding torque at 0.67 Amps.
Resources:
- Full Datasheet: 11HS12-0674S.pdf
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(oz.in) | 9.9 |
| Inductance(mH) | 4 |
| Phase Resistance(ohm) | 5.6 |
| Rated Current(A) | 0.67 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 31.5 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | O |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |
| Weight(g) | Weight(g) |
People Also Bought
MybotOnline
2013 ~ 2023. All Rights Reserved