Your shopping cart is empty!
Welcome to MybotOnline!
0
Shopping Cart
0 item(s) - $0.00
STEPPERONLINE Nema 23 Bipolar 1.8deg 2.4Nm (340oz.in) 1.8A 57x57x104mm 4 Wires
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
STEPPERONLINE Nema 23 Bipolar 1.8deg 2.4Nm (340oz.in) 1.8A 57x57x104mm 4 Wires
$28.30
5 or more $25.84
10 or more $24.61
50 or more $23.38
100 or more $22.15
10 or more $24.61
50 or more $23.38
100 or more $22.15
100% brand new from STEPPERONLINE (The No 1 distributor in the world for stepper motors and drivers).
This nema 23 stepper motor with step angle 1.8deg and size 57x57x104mm. It can generates 2.4Ncm (340oz.in) of holding torque at 1.8 Amps.
Resources:
- Full Datasheet: 23HS41-1804S.pdf
- Torque Curve: 23HS41-1804S Torque Curve.pdf
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 240 |
| Holding Torque(oz.in) | 340 |
| Inductance(mH) | 12 |
| Phase Resistance(ohm) | 2.75 |
| Rated Current(A) | 1.8 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 104 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 20.6 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 1250 |
| Frame Size(mm) | 57x57 |
People Also Bought
MybotOnline
2013 ~ 2023. All Rights Reserved