Your shopping cart is empty!
Welcome to MybotOnline!
0
Shopping Cart
0 item(s) - $0.00
STEPPERONLINE Nema 17 Bipolar 1.8deg 18Ncm (25.5oz.in) 0.7A 42x42x25mm 4 Wires
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
STEPPERONLINE Nema 17 Bipolar 1.8deg 18Ncm (25.5oz.in) 0.7A 42x42x25mm 4 Wires
$8.50
5 or more $7.78
10 or more $7.42
50 or more $7.06
100 or more $5.97
10 or more $7.42
50 or more $7.06
100 or more $5.97
100% brand new from STEPPERONLINE (The No 1 distributor in the world for stepper motors and drivers).
This nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It can generates 13Ncm (18.4oz.in) of holding torque at 0.7 Amps.
Resources:
- Full Datasheet: 17HS10-0704S.pdf
- Torque Curve: 17HS10-0704S Torque Curve.pdf
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 13 |
| Holding Torque(oz.in) | 18.41 |
| Inductance(mH) | 5.5 |
| Phase Resistance(ohm) | 4.2 |
| Rated Current(A) | 0.7 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 25 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | O |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |
| Weight(g) | 180 |
| Frame Size(mm) | 42x42 |
People Also Bought
MybotOnline
2013 ~ 2023. All Rights Reserved