Your shopping cart is empty!
Welcome to MybotOnline!
0
Shopping Cart
0 item(s) - $0.00
STEPPERONLINE Nema 17 Bipolar 1.8deg 59Ncm (84oz.in) 2A 42x48mm 4Wires w/ 1m Cable & Connector
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
STEPPERONLINE Nema 17 Bipolar 1.8deg 59Ncm (84oz.in) 2A 42x48mm 4Wires w/ 1m Cable & Connector
$10.65
5 or more $8.25
10 or more $7.82
50 or more $7.38
100 or more $6.95
10 or more $7.82
50 or more $7.38
100 or more $6.95
100% brand new from STEPPERONLINE (The No 1 distributor in the world for stepper motors and drivers).
This nema 17 stepper motor with step angle 1.8deg and size 42x42x47mm. It can generates 59Ncm (84oz.in) of holding torque at 2.0 Amps.
Resources:
- Full Datasheet: 17HS19-2004S1.pdf
- Torque Curve: 17HS19-2004S1 Torque Curve.pdf
This motor must be controlled by a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor and void the warranty.
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 59 |
| Holding Torque(oz.in) | 84 |
| Inductance(mH) | 3 |
| Phase Resistance(ohm) | 1.4 |
| Rated Current(A) | 2 |
| Step Angle(°) | 1.8 |
| Spindle Motor Specification | |
| Body Length(mm) | 48 |
| Physical Specification | |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Lead | 4 |
| Lead Length(mm) | 1000 |
| Weight(g) | 400 |
| Frame Size(mm) | 42x42 |
MybotOnline
2013 ~ 2023. All Rights Reserved